Support: Spark Nano 4

Dec 30th 2023

Support: Spark Nano 4 GPS Tracker Manual and FAQ

Instructions for Using the Spark Nano 4 GPS Tracker

1. Charging

  • Connect the included mini-USB to a power source and charge the Spark Nano 4 for at least 5 hours.
  • The red power light will blink while the device is charging and turn solid once charging is complete.

2. Power

  • Disconnect the GPS tracker from the power source.
  • Press and hold the Power button for 3 seconds to turn on the unit.
  • The red power light will light up briefly to let you know the device has powered on.

3. Test Drive

  • Take the Spark Nano 4 for a 20-30 minute test drive so that it may establish a GPS connection.
  • During the drive, keep the unit on your front dashboard facing upwards towards the sky.

4. Log In

  • Using a web browser, visit brickhousesecurity.com/gps-login OR open the App on your mobile device.
  • Check your email account for an email with the subject “Important: Your Password for GPS Login” to find your login information.

5. View Tracking

  • Once you log in, you will be able to see the tracking reports from your test drive.
  • You are now ready to begin tracking!
  • Get the most out of your BrickHouse Security GPS tracker by customizing your account with Geofences and Alerts.

Download User Manual


To help get you started with your device, please review this short tutorial video:

Click the attachment below to view or download the full manual for the Spark Nano 4.0 GPS Tracker.

FAQ

What do I do with my Spark Nano 4.0 as soon as I receive it?

Please charge the device using the included AC adapter for 6-8 hours. Turn on the device by holding down the power button for 3-4 seconds. The LEDs will flash to indicate the device powering on and attempting to connect to the network. Place the device on the dashboard of your car, facing skyward, and take it on a 20-minute drive to connect to the satellites and network.

What do all of these flashing light indicators mean?

Blue Light is GPS - When the blue light is blinking fast, it is acquiring satellite connection. Once connected, the light will blink blue at a steady pace, indicating that it is receiving location information. Orange Light is Power - The orange light will blink while charging. Once the battery is full, the battery light will go off. When the battery is low, it will blink orange at a steady pace. If you have not charged the device for a long time and the light does not light up when the device is plugged in, please charge the device for at least 6 hours, and try to power it on. Green Light is GSM Signal - This indicator blinks to indicate that the device has successfully connected to the GSM network. If there is no signal, the light will remain off.

How do I turn the Spark Nano 4.0 on/off?

Press and hold the power button for 5 seconds and release. The LED lights will light up and become solid until the device is booted up, and then the CDMA and GPS LEDs will blink. Give it about 10-15 seconds to be fully booted up upon powering on. To turn it off, you will need to quickly double-tap the same power button. You'll see the red LED lit up for about a minute as the unit is powering down. When that LED turns off, that means the unit is now powered off.

What is this big SOS button on the front?

The SOS button is ideal for personal tracking. A good example would be using it for a child who goes on a school trip. If they get lost, they press and hold the button for 5-6 seconds and, you'll receive an email or text message of the child's exact location. You can set up a "Panic" alert on the web platform.
Please click this link to see the tutorial video for setting alerts on the platform.

How do I activate my device?

Our GPS devices ship out pre-activated. You can log in to our tracking platform by going to www.brickhousesecurity.com, hover over Login at the top and select GPS on the drop-down menu and use the login information that will be emailed to you. You can also log in here.

If you haven’t received your login email, please check your spam filters in your email address. You can call us at 800-654-7966 or contact us here.

If you didn't purchase your device pre-activated, please visit our Activations page here.

How long will my battery last? How often will they track?

The battery life of any motion-sensitive device, like a GPS tracker, depends on how often it detects movement. The 1-minute tracking interval will give you around 13 tracking hours. You can set the device to report less often to preserve the battery life. When the device is not moving, the battery will last longer as it is not being used as extensively.

How do I extend the battery for longer usage?

This unit doesn't have a separate battery pack. If you suspect that the battery life is not enough for your particular needs, we suggest you use a different unit like our hardwired Livewire units or our TrackPort GPS.

I just charged my device and it isn't displaying 100% battery. Why?

All GPS devices transmit information when it is moving. The battery information comes from valid GPS messages sent from the device to our servers. The site displays the last valid battery indicator message that was received. If your device wasn't outdoors, in a good GPS area, or wasn't in motion, the battery indicator messages will not have been received from the site for the battery percentage to be updated.

Why isn't my tracker showing up on the map at all?

Please make sure the tracker is powered on by pressing the power button until you see LED lights lit up. Place the device where it has a clear line of sight to the sky and take it on a 20-minute drive. Remember that your device reports in 1-minute intervals so the device needs to be sensing movement for at least a couple of intervals for you to get a report.

My tracker shows several different reports within a 5 block radius. Why? Is this accurate?

GPS devices often drift when reporting their location depending on the surrounding of the GPS device. Every time the device sends a new location, it receives information from the GPS satellites. This calculation can differ slightly and buildings, trees, and the atmosphere can affect the quality of the location that the device provides.

My page is loading weird! Why is some information not displaying?

This could be a compatibility concern with the web browser that you are using. We optimized our GPS Platform to function best on widely used web browsers such as Mozilla Firefox and Google Chrome. If you are having problems viewing certain features on our site, we recommend that you view it through Mozilla Firefox. You can download and install it for free at http://www.mozilla.org/en-US/firefox/new/.

Why is the mobile site not loading on my phone or tablet, but I can see it on my PC?

Please try to clear the cookies and cache on your phone's internet browser and load the page again. You can also try using another internet browser on your phones such as Dolphin - which is available for free in the iTunes and Google Play store. If you are still having problems, you will need to contact your mobile carrier or phone manufacturer for support. You can alternatively use our free app.

My street view map is old! How can I get this updated?

The street view is a feature provided by Google Maps who is our preferred mapping vendor. Google occasionally updates these images on their own.

I charged my device but it isn't tracking. What's wrong?

If the battery died on your Spark Nano 4.0 and you recharged it, you must also power it back on, as the device will stay powered off. Please hold down the power button up to 3-4 seconds or until you see the lights react.

TrackView GPS Tracking Platform - Tutorial Videos

Downloads For Android and Apple devices

Spark Nano 4.0 Extended Battery Diagram

Managing Your Subscription Billing

Activate a Tracker